PG-5 TROUBLE CHART
(Continued)
See Section 281
|
| Trouble | Indication | Cause | Remedy |
Noisy Operation
(Continued) | | Loose cable connections. | Check all cable connections and tighten where necessary. Springing the prongs at the cable connection plugs slightly will make them fit snugly. |
| Defective photo cell. | Replace photo-cell. |
| Dirty contacts on photo-cell. | Clean the photo-cell contacts with fine sandpaper. |
| Disturbance increases when one of the amplifier tubes is tapped lightly. | Defective tube or dirty tube prongs on socket contacts. | Clean tube prongs and contacts. If this does not correct the trouble replace the tube. |
